Max Trailer 3-Achs-Plateau-Sattelauflieger
Verkoop
platte oplegger
Nieuw
Prijs op aanvraag
1 van 7
Algemene kenmerken
- Titel:
- Max Trailer 3-Achs-Plateau-Sattelauflieger
- Subcategorie:
- Platte opleggers
- Merk:
- Max Trailer
- Type advertentie:
- Te koop
- Kleur:
- Grijs
- Conditie:
- Nieuw
- Locatie:
- Dortmund, Duitsland
Omschrijving
Colour : Grey
payload weight : 38650 kg.
Braked
Available for rental
Loading floor:
• 2 pairs of lashing rings that can be folded outwards (LC 5.000 daN)
• 24 pairs of cutouts in the outer frame of the loading area for hanging tension straps (LC 2.000 daN)
Landing legs:
• JOST-landing legs (mechanical) with 2 gears and 24 tons lifting capacity
Axles and tyres:
• BPW axles, air suspended, with disc brakes (430 mm), with lifting/lowering function
• Tyres 385/65 R 22.5
Braking system:
• Braking system according to EU-regulations with EBS-E (2S2M)
Painting:
• First-class and long-lasting corrosion protection of the standardly shot-blasted welding frame trough a 2 components (2K) zinc dust priming
• A high-grade 2 components (2K) topcoat single-colour nova grey
• Rear section metallized and painted in RAL 9010 (pure white)
• No metallic paint possible
Steel construction:
• Steel construction of high-strength fine-grained steel
• Steel quality:
• **S355J2+N/S355MC (yield strength 355MPa)
• **S690QL/S700MC (yield strength 690MPa)
Electrical system:
• Electrical system according to EU-regulations, lighting 24 Volt
• ASPÖCK-NORDIK (ASS3)
• ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pin
• Connection according to ISO
• 24N ISO-1185
• 24S ISO-3731
• 15-pin ISO-12098
Additional equipment:
• Yellow-red air couplings on the galvanized connection strip at the front
• 4 pieces of wheel chocks with holder
• 2" king pin
• A galvanized steel front wall approx. 1.600 mm high. EN12642-XL
• White reflective tape in accordance with EU regulations on the side of the trailer and in red at the rear
• European reflector signs (red-yellow) on the rear of the trailer
• Loading area with approx. 30 mm thick hardwood floor framed in Omega profiles
• 10 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading area
• 3 pairs of stanchion pocket strips, mounted transversely in the loading area, for 100 x 50 mm
• Storage for 1.000 mm stanchions, at the rear of the central support
• 1 spare wheel holder under the loading area on the right in the direction of travel
• A mud flap at the rear of the trailer
• Manual and description on USB stick
• A holder for a warning light at the rear of the trailer
• On the gooseneck and on the rear panel there is a holder for the warning signs including a socket on the left and right
• 6 pairs of WADER container bags in the loading area, for 1x 20ft container, 2x 20ft container or 1x 40ft container. Rear flush.
• Speed sticker 80 km/h on the back and on both sides
• Four warning signs that can be extended by approx. 400 mm and are approx. 423 x 423 mm with an LED position light
• Load pressure gauge for determining the axle loads including load diagram
• HRM Metallisation (High Resistance Metallisation) of the outer frame.
• Complete steel contruction is shot-blasted, afterwards metallisation with ZINACOR 850 (zinc 85% - aluminium 15%).
Eigenschappen
- Ledig gewicht:
- 6.350 kg
- Laadvermogen:
- 38.650 kg
- Max. gewicht:
- 45.000 kg
- Afmetingen totaal:
- (L) 1.360 cm x (B) 254 cm
Afmetingen
- Breedte:
- 254 cm / 2.54 meter
- Lengte:
- 1.360 cm / 13.6 meter
Technische specificaties
- Aantal assen:
- 3
Asconfiguratie
- Schijfremmen
- Luchtvering
- Schijfremmen
- Schijfremmen
Ook interessant voor jou
Verkoop advertentie
Prijs op aanvraag

9 jaar actief op TrucksNL
49 reviews
Bedrijfsinformatie
Adresgegevens
HEAVYTRAILER AG
Martener Hellweg 10044379 DortmundDuitsland
Toevoegen als voorkeursbron op Google
Krijg de laatste updates van ons als eerste in je zoekresultaten.
Voeg ons nu toe











