Diversen ATD Machinery

Number: 1 Product category: Tuck packing line incl. labelling and bundling Brand: ATD Machinery Additional information: General specifications: Speed: Max. 60 packs per minute Product dimensions (tuck carton): 91x61x14mm Product dimensions (tuck carton): 82x53x30mm Product dimensions (tuck carton): 145x66x24mm Product dimensions (tuck carton): 82x25x25mm Number of blisters per pack: 1 piece Number of leaflets per pack: 1 piece Number of cartons per display: 10 pieces General description of the machine line: The packaging line provides the following functions: A1 - ATP Packer: Packing a blister pack, after erecting the carton, together with a loose folded leaflet, into a tuck-end carton (tuck). The tuck carton is glued shut at the bottom and tucked closed at the top. While the carton is being filled, the presence of a leaflet and a blister is checked. If either or both are missing, the carton concerned is rejected and does not continue down the packaging line. The semi-finished components: blister, leaflet and carton are loaded manually into the respective magazines. A2 – Conveyor belt: The ATP packer and the ABM machine are linked by a conveyor belt. A3 – ABM Machine: If required, the carton is fitted with a tax stamp. This is applied to the tucked side of the carton and then wiped down onto the top and/or bottom. The tax stamp magazine must be filled manually. During application, the stamp is provided with 2 glue lines by means of automatic glue guns. After the banderole has been wiped down, the carton can be rotated by a turning unit to obtain the correct orientation for the downstream process. Opposite the tax stamp application, a code can be lasered by the laser unit if desired. NOTE: the position is fixed and always opposite the banderole side. During application of the banderole, a check is made that it is actually on the carton. If it is missing, the carton is rejected. In addition to the banderole unit, the ABM machine is also equipped with a labelling unit. This makes it possible to apply a sticker seal. A4 – Single-carton overwrapping machine: This machine fully overwraps the carton in cellophane. This machine is not a shrink wrapper, but a machine that seals the cellophane with a so-called envelope fold. A Marden Edwards overwrapping machine was chosen. A5 – Conveyor belt with infeed unit: Cartons are conveyed from the overwrapping machine via a small belt to the display loader. Via a bypass, alternative products can also be packed on the back end of the line. An accumulation table makes it possible to take off products after the overwrapping machine. A6 – Display loader This machine erects the display and then pushes a stack of cartons into it. The displays are fed to the machine “flat” by the operator. The machine opens them up so that the stack can be inserted. The display is glued on 1 side; the top is open. A7 – Labeller with printer This machine applies one label per display. The required d This lot is offered via an online auction at AUCTIM. For info and bidding, please visit AUCTIM's website. Please direct any additional questions to [email protected]. This will provide the fastest response.