Max Trailer 2-Achs-Tiefbett mit Pendelachsen

Colour : Grey Extendable Braked Available for rental Gooseneck: • Gooseneck in SNT design to optimize the length of the loading area, length approx. 3.785 m • Gooseneck can be raised/lowered hydraulically and removed • Fifth wheel load (technical): 23.000 kg • For truck: 4 x 2, 6 x 2 and 6 x 4 Low deck: • Low deck in extendable outer beams construction, "SUPER LOW" Design, length approx. 6.850 mm • Low deck with hardwood floor approx. 40 mm thick and mechanical locking • The supply lines are protected in the pull-out supports and automatically adjust to the length of the low bed • 5 pairs of lashing rings that can be folded outwards (LC 10.000 daN) • 6 pairs of threaded blocks on the inner beams for mounting screwable RUD rings Additional equipment: • Preparation for receiving screw-on container positioning for 1x 20' or 1x40' container on the external beams. Container locks optionally available • 2" king pin • A galvanized steel bulkhead approx. 400 mm high • A spare wheel with holder in front of the bulkhead • Yellow-red air couplings on the front of the galvanized connection strip • 4 pieces of wheel chocks with holder • Follow-up steering can be operated from the front and rear using cable remote control via pushbuttons, with one-track control of the axles • Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings. No guarantee on seals • Electro-hydraulic unit • Red reflective tape on the side, on the pull-out and on the back in accordance with EU regulations • 2 blocks of wood 500x250x200 mm • A holder for a warning light at the rear of the trailer • A mud flap at the rear of the trailer • European reflector signs (red-yellow) on the rear of the trailer • On the gooseneck and on the rear panel on the left and right, a holder for the warning signs including a socket • Manual and description on USB stick • 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screwable RUD rings VLBG-4 • A separate air connection with air pistol on the gooseneck • ALU side walls and rear wall can be plugged onto the gooseneck, approx. 2.440 x 400 mm • The rear galvanized stanchions are removable. (Length of the body approx. 2.560 mm) • 2 pairs of screwable lashing rings M20 (LC 5.000 daN) • 5 pairs of stanchion pockets for plug-in stanchion 100 x 50 mm in the outer beam of the loading area • Foldable extensions by approx. 230 mm on each side • 1 pair of steel ramps to bridge the liftinghooks of the low deck • A coated layer of sand on the loading area to prevent slipping • Speed sticker 80 km/h on the rear and on both sides • Excavator recess of the rear axle bogie closed with a plug-in plate at the rear • 4 warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with an position light • A holder for a warning light on the warning signs • Radio remote control for tracking in addition to the cable remote control, with indicator lights on the receiver as lane con